• Well-known HORSCH Leeb BoomControl boom control system
  • Optimum boom positioin even at high operational speeds due to individual wheel suspension and parallel suspension of the boom
  • Practical control terminals and an ergonomic joystick for an intuitive handling, perfectly adapted to the application requirements
  • Continuous inside cleaning CCS Pro with electrical valves and external control terminal; spraying and cleaning functions can be controlled in the cabin
  • Automatic GPS-controlled section control system SectionControl
  • Up to 42 section with individual layout
HORSCH Leeb 6.300 PT 8.300 PT
Motor
Water-cooled motor FPT (Fiat Powertrain Technologies) N67
Power (kW/HP) 230 / 310
Number of cylinders / cooling 6 / water / turbo with intercooler
Displacement (cm ) 6 700
Nominal speed (rpm) 2 000
Max. torque (Nm/speed) 1 160 / 1 400
Control Elektronic EMR
Tank capacity Diesel / AdBlue (l) 450 / 45
Emission standard Level V
Gearbox
Gearbox type Wheel hub drive
Working range Field / road
Transmission Hydrostatic stepless
Speeds Field: 0 – 25 km/h; road: 0 – 40 km/h resp. 0 – 50 km/h; top speed possible at 1 700 rpm
All wheel drive Permanent, rear axle swith-off in road mode beyond 30 km/h
Chassis  
Chassis suspension Suspension via double control arm and portal
Axle suspension Hydropneumatic suspension with active level regulation, automatic switching between soft and hard suspension set-up when changing between field and road mode
Underbody Continuously smooth, plant protecting vehicle underside
Steering
Front axle Hydraulic
Rear axle Hydraulic-electric steering, automatic centring and locking during road transport
Types of steering Only front axle steering (road mode), all-wheel steering (field mode), automatic slope steering, manual rear axle steering also possible
Brake system
Service brake Hydrostatic high-performance brake, front axle with integrated, wet multi-disc brake
Parking brake Multiple disc brake, operated hydraulically via spring accumulator
Hydraulic system
Traction drive pump (cm³) 175
Working hydraulics pump (cm³) 160
Power (l/min) 320
Working pressure (bar) 200
Electric system
Voltage (V) 12
Alternator (V) 14 / 200
Battery (Ah/A) 180 / 1 000
Wiring CAN-Bus / ISOBUS
Interface to superstructure ISOBUS with voltage supply
Travel control
Electronic travel control
Load-limit control
Over revving control
Cruise control function
Automotive driving via accelerator pedal or control lever (speed via pedal or joystick; motor speed and hydrostat regulate themselves automatically)
Cab
Front cabin with an interior volume of 3.5 m³ and a glass surface of 7.0 m²
Automatic climate control / heating
Comfort seat with air suspension, vibration damping and seat ventilation
Passenger seat
Numerous compartments and a cooling compartment
Control lever is integraed in the ergonomic control armrest
Radio with bluetooth interface
Display field in A column for vehicle functions and speedometer
ISOBUS terminal for spraying functions is integrated in the control armrest
Optional: Automatic Cat. IV cabin filter system
Standard tyres (other tyres upon request)
VF 520 / 85 R46
Measures and weights
Unladen weight (kg) approx. 11 200 (depending on the equipment)
Max. allowed total weight (kg) Wheel drive PowerGear 18 000 kg / Wheel drive HighPowerGear 20 000 kg
Max. total weight field (kg) 24 000 (depending on the tyres)
Ground clearance (mm) approx. 1 250 depending on the tyres and the position of the suspension
Wheel base (mm) 3 900
Track width (mm) 200 – 225
Length (mm) approx. 9 800 (depending on the boom version and the tyres)
Height (mm) 3 980
Total width (mm) 2 550 (tyres and mudguards can be wider)
Barrel mountings
Mixture tank Polyethylene (PE) Stainless steel
Mixture tank nominal capacity (l) 6 000 8 000
Mixture tank actual capacity (l) 6 350 8 450
Fresh water tank (l) 550 550
Hand-wash tank (l) 15 15
Spraying boom
Working widths 24 / 15 5 sect.
27 / 15 5 sect.
30 / 15 5 sect.
30 / 18 5 sect.
32 / 18 5 sect.
33 / 18 5 sect.
36 / 18 5 sect.
27 / 21 / 12 7 sect.
28 / 21 / 12 7 sect.
30 / 21 / 12 7 sect.
30 / 24 / (12) 7 sect.
32 / 24 / (12) 7 sect.
33 / 24 / (12) 7 sect.
36 / 24 / (12) 7 sect.
38 / 27 / (14) 7 sect.
39 / 27 / (14) 7 sect.
40 / 28 / (14) 7 sect.
42 / 28 / (14) 7 sect.
44 / 30 / (14) 7-section
45 / 30 / (14) 7-section
Section, min. / max. (piece) 6 – 42
Working height (m) 0.3 – 2.5
Pump output (l/min) 1 000
Working pressure, max. (bar) 8
Operational speed (km/h) 4 – 20