Horsch Titan 34 UW
The new HORSCH auger waggon Titan 34 UW stands for harvest efficiency in a new dimension. It has inherited the genes of the first HORSCH auger waggons and raises them to a completely new technical level. Due to the large hopper capacity of 34 m³ idle times on the field boundaries and awkward manoeuvring are part of the past. The hopper capacity of the UW corresponds to one truckload. A truck is thus filled at one go. The output of the newly designed hydraulically foldable auger conveyor (ø 600 mm) is 18 tons per minute – corresponding to gigantic 1 000 tons per hour. Thus, 34 m³ are reloaded in only 90 seconds. When driving on the field, the auger can be folded in and rests safely in a support. In driving position, the folded auger does not overlap at any side. The width when driving on the road, then, is below 3 m.
The Titan 34 UW has a telescopic axle as standard equipment. It moves every tyre to the outside by 30 cm. This increases the width of the machine from 3 m to 3.56 m. Thus, stability is increased and soil pressure reduced as the tyres of the auger waggon do not run in the tractor tracks. Another soilsaving means are the large-dimensioned tyres (900 / 60 R 32). To guarantee a maximum contact area, power tracks are available as an option.
Moreover, there are an integrated weighing system, a pneumatic (and hydraulic) brake system and a clearly visible display of the opening situation of the auger conveyor slider. From the drawbar platform a ladder leads onto resp. into the waggon. Inside the waggon there are steps on the auger to climb inside for cleaning or maintenance works.
HORSCH Titan UW
|Chassis options||tyres 900 / 60 R 32 / Power tracks 2.56 m x 0.91 m|
|Telescopic axle||Only with tyres / No power tracks possible|
|Transport width tyres 900 / 60 R 32 (m)||3.00|
|Transport width power tracks||3.50|
|Machine width telescopic axle extended (m)||3.56 (Only with tyres 900 / 60 R 32)|
|Transport height (m)||4.00|
|Filling height of hopper side / centre (m)||3.48 without tarpaulin / 3.60 with tarpaulin|
|Transfer height (m)||4.60|
|Total weight empty starting from (kg)*||7 440|
|Rear axle load (kg)||5 820|
|Front towbar load (kg)||1 620|
|Tank capacity (m³)||34|
|Hydr. foldable auger Ø (mm)||600|
|Transfer output tons / min||18|
|Universal joint shaft tractor||1 3 / 8” – Z 6, 1 3 / 8 – Z 21, 1 3 / 4 – Z 6, 1 3 / 4 – Z 20|
|Double acting valves||4|
|Adj. drawbar linkage||Ring hitch Ø 50 – 55 mm|
|Ball-type linkage||K 80|